By Kaidi Chemical developed the production of KD-L313 metal cleaning products from a variety of features super compatibility surfactants and other additives made by the scientific complex, thoroughly wash all kinds of oil and metal left after machining, in order to successfully carry out the subsequent fine machining process, the corrosion rate is almost zero, cleaning rate of 99.9%. Non-toxic and non-corrosive products, safe and reliable, non-irritating ingredients, dirty liquid rapidly degraded, do not pollute the environment, is a new generation of environmentally friendly products. Avoid the traditional thermal cleaning and solvent cleaning ills, by the majority of users. Technical Specifications: Appearance: light yellow liquid pH: 8.0 to 9.0 (5% solution) Relative density: 1.00 to 1.10 rust resistance [35 ± 2 ℃ RH (95 ± 2)% 24h]: cast iron grade ≤1 use: 1, the FDA should carefully read the product manual, and under the guidance of the professionals use. 2, the cleaning method can be hot immersion, ultrasonic cleaning, hand wiping. 3, when used according to the severity of the oil to the deployment of cleaning fluid concentrations, typically 5-30 times the stock solution is diluted to use. Hand-wipe cleaning detergent concentration is relatively higher. Can be used at room temperature, but at a temperature of 55 ~ 80 ℃ cleaning, the best results. 4, when the thermal soaking method, with a good concentration of 5% to 10% cleaning solution is heated to 55 ~ 80 ℃, 5 to 15 minutes after washing (cleaning suitably shake the workpiece, better cleaning effect), with pure water / water rinse and then dry. 5, the use of ultrasonic cleaning, dilution of 20-30 times, to obtain a better cleaning effect. The KD-L313 metal oil cleaner was heated to 55 ~ 65 ℃, 2 to 5 minutes after washing, with pure water / tap water rinse and then drying. Note 1, the severity of adjusting the concentration of oil in accordance with the cleaning solution, the workpiece after cleaning rinse thoroughly. 2, promptly bath oil slick surface exclusion, so as to avoid secondary pollution. 3, the cleaning of the workpiece may not overlap, you should regularly add 1% to 3% of the daily cleaning agent, such as cleaning can not reach its original level after capacity as supplemented, can be replaced with new fluid discarded. Packaging: 25 kg, 200 kg of packaging; Shelf life: two years. If the product needs and questions, please call the Cadillac Division of Chemical Industrial Cleaning Technology Centres cleaning solution and quote. Manufacturers supply directly to the customer's plant (Shandong metal cleaner brand products, Jinan metal cleaner brand products, Zibo metal cleaner brand products, Dongying metal cleaner brand products, Hebei metal cleaner brand products, Tangshan metal cleaner brand products Baoding metal cleaner brand products, Shijiazhuang metal cleaner brand products, metal cleaner brand products Wuxi, Changzhou and metal cleaner brand products, Inner metal cleaner brand products, metal cleaning agent Xinjiang brand products), product quality and technical strength one hundred one hundred points is guaranteed!